Steel fabrication · Carbon / stainless steel
Railings and handrails in Burgas
A railing must be as solid as a structure and as clean as furniture – so we grind and polish every seam, and anchor every post to suit the base and the code loading.
304/316
stainless by environment
≥100 cm
code height
6 mo.
workmanship warranty
For stairs, terraces and balconies – built to code
We fabricate and install railings and handrails for internal staircases, terraces, balconies and external approaches – in carbon steel with powder or wet coating, and in stainless steel for representative and seaside sites. The design is individual: clean lines with horizontal infills, vertical balusters at code spacing, or combinations with toughened glass.
For stainless railings we use AISI 304 indoors and AISI 316 for external and marine environments, TIG-welded under argon and ground to satin or polished to a mirror – the seam is practically invisible. Handrails are finished with caps and elbows in the same material, and joints in modular systems are fixed mechanically for easy replacement.
Installation follows the code height (minimum 100 cm, 105+ cm at greater fall heights) and the horizontal handrail loading. Posts are anchored with mechanical or chemical anchors to suit the base – concrete, masonry or steel – side-mounted (fascia) or top-mounted. Survey and measurement are free in the Burgas area; we hand over with an invoice and a 6-month workmanship warranty.
What the service includes
- Railings for internal and external staircases
- Terrace and balcony rails, fascia or top mounted
- Stainless AISI 304/316 with TIG welds and polishing
- Carbon steel with powder or wet coating
- Infills of balusters, horizontal bars or toughened glass
- Anchoring with mechanical or chemical anchors
Advantages
Technologies & materials
Burgas and the region – no travel charge. Pomorie, Nesebar, Sozopol, Aytos and Karnobat on regular runs; projects across Bulgaria by arrangement.
Frequently asked questions about railings & handrails
For open terraces near the sea we recommend AISI 316 – molybdenum-alloyed stainless made for salt environments. AISI 304 suits interiors, while painted steel is cheaper but needs its coating refreshed every few years.
Have a welding or fabrication project?
Describe it or send a photo with dimensions – the survey in the Burgas area is free.
Contact
Request a quote for your project
Our mobile crews carry full MIG, TIG and stick equipment – the survey in the Burgas area is free.
Contact details
WeldFlux – a registered Bulgarian company.